Auxiliary classes and methods for detector calibration. More...

Classes
class	JAnchor
	Data structure for anchor position on sea bed. More...

class	JCalibration
	Data structure for PMT calibration. More...

struct	JCalibrator
	Auxiliary class to apply (de-)calibration to template hit. More...

struct	JCalibrator< JHit_t, false >
	Template specialisation of JCalibrator for non-primitive data types. More...

struct	JCalibrator< T, true >
	Template specialisation of JCalibrator for primitive data types. More...

class	JCLBDefaultSimulator
	Default CLB simulation. More...

class	JCLBDefaultSimulatorInterface
	Default CLB simulation. More...

class	JCLBSimulator
	Interface for CLB simulation. More...

class	JCompass
	Data structure for comapss in three dimensions. More...

class	JCompassMatrix
	Compass matrix. More...

class	JDAQHitRouter
	Simple wrapper around JModuleRouter class for direct addressing of PMT data in detector data structure for DAQ hits. More...

class	JDetector
	Detector data structure. More...

class	JDetectorAddressMap
	Lookup table for PMT addresses in detector. More...

struct	JDetectorAddressMap_t
	Auxiliary class to extract detector address map from detector identifier. More...

struct	JDetectorAddressMap_t< JTypeList< JHead_t, JNullType > >

struct	JDetectorAddressMap_t< JTypeList< JHead_t, JTail_t > >

class	JDetectorHeader
	Data structure for detector header. More...

class	JDetectorParameters
	Data structure for parameters for detector geometry. More...

class	JDetectorParametersHelper
	Auxiliary class for I/O of JDetectorParameters data structure. More...

class	JDetectorSimulator
	Detector simulation. More...

class	JDetectorSubset
	Detector subset with binary search functionality. More...

class	JDetectorSubset_t
	Detector subset without binary search functionality. More...

struct	JDetectorVersion
	Detector version. More...

struct	JGetDetectorVersion
	Auxiliary class to map detector variant to detector version. More...

struct	JGetPMTStatusBit
	Auxiliary class to map key to PMT status bit. More...

class	JK40DefaultSimulator
	Default implementation of the simulation of K40 background. More...

class	JK40DefaultSimulatorInterface
	Default K40 simulator interface. More...

struct	JK40Rates
	Auxiliary class for K40 rates. More...

class	JK40RunByRunSimulator
	K40 simulation based on run-by-run information. More...

class	JK40Simulator
	Interface for simulation of K40 background. More...

struct	JKM3NeT_t
	KM3NeT. More...

struct	JMaximalDistance
	Auxiliary class to match modules according maximal distance. More...

class	JModule
	Data structure for a composite optical module. More...

class	JModuleAddress
	Address of module in detector data structure. More...

class	JModuleAddressMap
	Lookup table for PMT addresses in optical module. More...

struct	JModuleAttributes
	Data structure for module address and module attributes. More...

struct	JModuleComparator3D_t
	Module comparator according its distance to origin. More...

struct	JModuleComparator3Z_t
	Module comparator according its z-position. More...

class	JModuleData
	Data structure for PMT data corresponding to a detector module. More...

class	JModuleGeometry
	Module geometry. More...

class	JModuleLocation
	Logical location of module. More...

class	JModuleMapper
	Mapper for directly addressing of associated modules in the detector data structure. More...

struct	JModulePosition_t
	Auxiliary data structure for module position. More...

struct	JModuleRotation_t
	Auxiliary data structure for module rotation. More...

class	JModuleRouter
	Router for direct addressing of module data in detector data structure. More...

struct	JModuleSignalProcessor
	Auxiliary container for PMT signal processors in same optical module. More...

struct	JMonteCarlo_t
	Monte Carlo .detx file. More...

class	JMonteCarloDetector
	Monte Carlo detector (i.e. More...

struct	JObsolete_t
	obsolete detector More...

struct	JPhotoElectron
	Data structure for single photo-electron. More...

class	JPMT
	Data structure for PMT geometry and calibration. More...

class	JPMTAddress
	Address of PMT in detector data structure. More...

struct	JPMTAddressTranslator
	Data structure to translate PMT physical to readout address. More...

struct	JPMTAnalogueSignalProcessor
	PMT analogue signal processor. More...

struct	JPMTCalibration_t
	Auxiliary data structure for PMT calibration. More...

class	JPMTChannel
	Auxiliary class to uniquely identify PMT readout channel. More...

class	JPMTData
	Template data structure for PMT I/O. More...

class	JPMTDefaultSimulator
	Default PMT simulation. More...

class	JPMTDefaultSimulatorInterface
	Default PMT simulation interface. More...

class	JPMTIdentifier
	PMT identifier. More...

class	JPMTParameters
	Data structure for PMT parameters. More...

class	JPMTParametersMap
	Auxiliary class for map of PMT parameters. More...

class	JPMTPhysicalAddress
	Data structure for PMT physical address. More...

struct	JPMTPulse
	Data structure for PMT digital pulse. More...

struct	JPMTRateRange
	Data structure for range of PMT rates. More...

class	JPMTReadoutAddress
	Data structure for PMT readout address. More...

class	JPMTRouter
	Router for direct addressing of PMT data in detector data structure. More...

class	JPMTRunByRunSimulator
	PMT simulation based on run-by-run information. More...

struct	JPMTSignal
	Data structure for PMT analogue signal. More...

class	JPMTSignalProcessorInterface
	PMT signal processor interface. More...

class	JPMTSimulator
	Interface for PMT simulation. More...

struct	JPPM_DU_t
	Type definitions for different detectors.PPM_DU. More...

struct	JPutDetectorVersion
	Auxiliary class to map detector version to detector variant. More...

struct	JPutPMTStatusBit
	Auxiliary class to map PMT status bit to key. More...

struct	JRotation
	Auxiliary class to get rotation matrix between two optical modules. More...

class	JTemplateDetectorAddressMap
	Template lookup table for PMT addresses in detector. More...

class	JTemplateDetectorAddressMap< JKM3NeT_t >
	Template specialisation of JTemplateDetectorAddressMap for KM3NeT detector. More...

class	JTemplateDetectorAddressMap< JMonteCarlo_t >
	Template specialisation of JTemplateDetectorAddressMap for Monte Carlo detector. More...

class	JTemplateDetectorAddressMap< JObsolete_t >
	Template specialisation of JTemplateDetectorAddressMap for obsolete detector. More...

class	JTemplateDetectorAddressMap< JPPM_DU_t >
	Template specialisation of JTemplateDetectorAddressMap for PPM_DU detector. More...

class	JTransferFunction1D
	Auxiliary class for a non-linear transfer function of TDC inside FPGA. More...

class	JTransitionTimeGenerator
	Auxiliary class to generate PMT transition times based on measurements by Oleg Kalekin et al. More...

class	JTransitionTimeProbability
	Probability distibution of the PMT transition times based on measurements by Oleg Kalekin et al. More...

class	JTransitionTimeProbability2D
	Auxiliary class to generate twofold PMT transition times. More...

struct	JUTCDistance
	Auxiliary class for distance beteen UTC times. More...

Typedefs
typedef JPMTData< JPMTPulse >	JPMTOutput
	Type definition of PMT base output. More...

typedef std::vector< JPMTOutput >	JCLBInput
	Type definition of CLB input. More...

typedef JTYPELIST< JPPM_DU_t, JKM3NeT_t, JMonteCarlo_t >::typelist	JDetectorTypes_t
	Type list of detector types. More...

typedef std::vector< JPMTCalibration_t >	JPMTCalibration
	PMT calibration. More...

typedef std::vector< JModulePosition_t >	JModulePosition
	Module position. More...

typedef std::vector< JModuleRotation_t >	JModuleRotation
	Module rotation. More...

typedef double	JRateL0_t
	Type definition of singles rate [Hz]. More...

typedef std::vector< double >	JRateL1_t
	Type definition of count rate as a function of multiplicty [Hz] The multiples rate start counting at two-fold coincidences. More...

typedef size_t	multiplicity_type
	Type definition of multiplicity. More...

typedef JLANG::JComparator< double(JVector3D::*)() const >	JModuleComparator
	Type definition of a module comparator using 3D position information. More...

typedef JLANG::JObjectID	JModuleIdentifier

typedef std::map< JPMTIdentifier, JPMTParameters >	JPMTParametersMap_t
	Type definition of map PMT identifier to PMT parameters. More...

Functions
bool	operator< (const JAnchor &first, const JAnchor &second)
	Sort anchors in ascending distance from (0,0). More...

template<class T >
double	getTime (const T &t1, const JCalibration &cal)
	Get calibrated time. More...

template<class T >
double	putTime (const T &t1, const JCalibration &cal)
	Get de-calibrated time. More...

template<class T >
double	getToT (const T &tot, const JCalibration &cal)
	Get calibrated time-over-threshold of hit. More...

template<class T >
double	putToT (const T &tot, const JCalibration &cal)
	Get de-calibrated time-over-threshold of hit. More...

void	reset (JCLBInput &data, size_t size)
	Reset CLB buffers. More...

bool	hasDetector (JType< JPPM_DU_t > type, const int id)
	Check validity of detector identifier. More...

bool	hasDetector (JType< JKM3NeT_t > type, const int id)

bool	hasDetector (JType< JMonteCarlo_t > type, const int id)

template<class JDetector_t >
JDetectorAddressMap &	getDetectorAddressMap ()
	Get detector address map. More...

template<class JDetector_t >
JModuleAddressMap &	getModuleAddressMap (int id)
	Get module address map. More...

template<class JDetector_t >
const JPMTAddressTranslator &	getPMTAddressTranslator (int id, int tdc)
	Get PMT address translator for given module identifier and TDC channel. More...

template<class JDetector_t >
int	getPMTLogicalIndex (int id, int tdc)
	Get PMT logical index for given module identifier and TDC channel. More...

JDetectorAddressMap &	getDetectorAddressMap (const int id)
	Get detector address map. More...

bool	hasDetectorAddressMap (const int id)
	Check if detector address map is available. More...

bool	is_valid (const json &js)
	Check validity of JSon data. More...

void	to_json (json &js, const JPMTCalibration_t &object)
	Convert PMT calibration to JSon. More...

void	from_json (const json &js, JPMTCalibration_t &object)
	Convert JSon to PMT calibration. More...

void	to_json (json &js, const JModulePosition_t &object)
	Convert module position to JSon. More...

void	from_json (const json &js, JModulePosition_t &object)
	Convert JSon to module position. More...

void	to_json (json &js, const JModuleRotation_t &object)
	Convert module rotation to JSon. More...

void	from_json (const json &js, JModuleRotation_t &object)
	Convert JSon to module rotation. More...

JDetectorHeader	getARCADetectorHeader ()
	Get detector header for ARCA. More...

JDetectorHeader	getORCADetectorHeader ()
	Get detector header for ORCA. More...

double	getMaximalDistance (const JDetector &detector)
	Get maximal distance between modules in detector. More...

double	GetXrotationG4 (const JVersor3D dir)
	Get rotation over X axis in Geant4 coordinate system. More...

double	GetYrotationG4 (const JVersor3D dir)
	Get rotation over Y axis in Geant4 coordinate system. More...

void	read_gdml (std::istream &, const JDetector &)

void	write_gdml (std::ostream &out, const JDetector &detector)
	Writes KM3Sim GDML input file from detector. More...

double	getMaximalTime (const JDetector &detector)
	Get maximal time between modules in detector following causality. More...

double	getMaximalTime (const JDetector &detector, const double roadWidth_m)
	Get maximal time between modules in detector following causality. More...

JTimeRange	getTimeRange (const JTimeRange &timeRange, const JModule &module)
	Get de-calibrated time range. More...

int	getNumberOfPMTs (const JModule &module)
	Get number of PMTs. More...

int	getNumberOfPMTs (const JDetector &detector)
	Get number of PMTs. More...

int	getNumberOfStrings (const JDetector &detector)
	Get number of strings. More...

std::set< int >	getStringIDs (const JDetector &detector)
	Get list of strings IDs. More...

int	getNumberOfFloors (const JDetector &detector)
	Get number of floors. More...

int	getNumberOfModules (const JDetector &detector)
	Get number of modules. More...

void	load (const JString &file_name, JDetector &detector)
	Load detector from input file. More...

void	store (const JString &file_name, const JDetector &detector)
	Store detector to output file. More...

const JModule &	getModule (const JModuleAddressMap &memo, const int id, const JModuleLocation &location=JModuleLocation())
	Get module according module address map. More...

const JModule &	getModule (const int id, const JModuleLocation &location=JModuleLocation())
	Get module corresponding to Antares storey. More...

std::string	getModuleLabel (const JModuleLocation &location)
	Get module label for monitoring and other applications. More...

JPosition3D	getPosition (const JModule &first, const JModule &second)
	Get position to go from first to second module. More...

JCalibration	getCalibration (const JCalibration &first, const JCalibration &second)
	Get calibration to go from first to second calibration. More...

std::vector< std::string >	getDetectorVersions (const JType< std::string > &type)
	Get detector versions. More...

std::vector< JDetectorVersion::JVersion_t >	getDetectorVersions (const JType< JDetectorVersion::JVersion_t > &type)
	Get detector versions. More...

template<class T >
std::vector< T >	getDetectorVersions ()
	Get detector versions. More...

template<class JAttributes_t >
void	setAttributes (const JModule &first, const JModule &second, JAttributes_t &attributes)
	Template method to set module attributes. More...

template<>
void	setAttributes< JNullType > (const JModule &first, const JModule &second, JNullType &attributes)
	Template specialisation to set no attributes for the default empty object. More...

std::vector< std::string >	getPMTStatusBits (const JType< std::string > &type)
	Get PMT status bits. More...

std::vector< JPMT::JPMTStatusBits_t >	getPMTStatusBits (const JType< JPMT::JPMTStatusBits_t > &type)
	Get PMT status bits. More...

template<class T >
std::vector< T >	getPMTStatusBits ()
	Get PMT status bits. More...

bool	operator< (const JPMTIdentifier &first, const JPMTIdentifier &second)
	Less than operator for PMT identifiers. More...

bool	operator== (const JPMTIdentifier &first, const JPMTIdentifier &second)
	Equal operator for PMT identifiers. More...

double	getSurvivalProbability (const JPMTParameters &parameters)
	Get model dependent probability that a one photo-electron hit survives the simulation of the PMT assuming QE = 1. More...

double	getHitProbability (const double QE, const double mu)
	Get ratio of hit probabilities for given QE and expectation value of the number of photo-electrons. More...

double	getMaximalHitProbability (const double mu)
	Get maximal ratio of hit probabilities for given QE and expectation value of the number of photo-electrons. More...

double	getQE (const double R, const double mu)
	Get QE for given ratio of hit probabilities and expectation value of the number of photo-electrons. More...

bool	operator< (const JPhotoElectron &first, const JPhotoElectron &second)
	Less than operator for photo-elecrons. More...

bool	operator< (const JPMTSignal &first, const JPMTSignal &second)
	Less than operator for PMT signals. More...

bool	operator< (const JPMTPulse &first, const JPMTPulse &second)
	Less than operator for PMT pulses. More...

JTimeRange	getTimeRange (const JModuleData &input)
	Get time range (i.e. More...

Variables
const double	TIME_OVER_THRESHOLD_NS = 26.4
	Specification for time-over-threshold corresponding to a one photo-electron pulse. More...

static const std::string	Result_t = "Result"
	Detector calibration key words for JSON I/O. More...

static const std::string	Comment_t = "Comment"

static const std::string	Data_t = "Data"

static const std::string	PMTT0s_t = "PMTT0s"

static const std::string	DOMPositions_t = "DOMPositions"

static const std::string	DOMRotations_t = "DOMRotations"

static const std::string	PMTSerial_t = "PMTSerial"

static const std::string	DOMSerial_t = "DOMSerial"

static const std::string	DOMId_t = "DOMId"

static const std::string	T0_t = "T0"

static const std::string	PX_t = "PX"

static const std::string	PY_t = "PY"

static const std::string	PZ_t = "PZ"

static const std::string	Q0_t = "Q0"

static const std::string	QX_t = "QX"

static const std::string	QY_t = "QY"

static const std::string	QZ_t = "QZ"

static const std::string	OK_t = "OK"

static const char *const	GENDET_DETECTOR_FILE_FORMAT = ".det"
	File name extensions. More...

static const char *const	BINARY_DETECTOR_FILE_FORMAT = ".dat"
	JIO binary file format. More...

static const char *const	KM3NET_DETECTOR_FILE_FORMAT = ".detx"
	KM3NeT standard ASCII format. More...

static const char *const	ZIPPED_DETECTOR_FILE_FORMAT = ".gz"
	zipped KM3NeT standard ASCII format More...

static const char *const	GDML_DETECTOR_FILE_FORMAT = ".xml"
	KM3Sim input format. More...

static const char *const	GDML_SCHEMA = getenv("GDML_SCHEMA_DIR")
	directory necessary for correct GDML header output More...

static JRotation	getRotation
	Function object to get rotation matrix to go from first to second module. More...

static const JGetDetectorVersion	getDetectorVersion
	Function object to map detector variant to detector version. More...

static const JPutDetectorVersion	putDetectorVersion (getDetectorVersion)
	Function object to map detector version to detector variant. More...

static const int	LED_BEACON_PMT_TYPE = 2
	PMT type of LED beacon. More...

static const JGetPMTStatusBit	getPMTStatusBit
	Function object to map key to PMT status bit. More...

static const JPutPMTStatusBit	putPMTStatusBit (getPMTStatusBit)
	Function object to map PMT status bit to key. More...

static const JTransitionTimeGenerator	getTransitionTime
	Function object to generate transition time. More...

static const JTransitionTimeProbability	getTransitionTimeProbability
	Function object of transition time prabability. More...

static const JTransitionTimeProbability2D	getTransitionTimeProbability2D
	Function object of twofold transition time prabability. More...

Detailed Description

Auxiliary classes and methods for detector calibration.

Auxiliary classes and methods for detector calibration and simulation.

Author: mdejong

Typedef Documentation

◆ JPMTOutput

typedef JPMTData<JPMTPulse> JDETECTOR::JPMTOutput

Type definition of PMT base output.

Definition at line 26 of file JCLBSimulator.hh.

◆ JCLBInput

typedef std::vector<JPMTOutput> JDETECTOR::JCLBInput

Type definition of CLB input.

Definition at line 32 of file JCLBSimulator.hh.

◆ JDetectorTypes_t

typedef JTYPELIST<JPPM_DU_t, JKM3NeT_t, JMonteCarlo_t>::typelist JDETECTOR::JDetectorTypes_t

Type list of detector types.

Definition at line 42 of file JDetectorAddressMapToolkit.hh.

◆ JPMTCalibration

typedef std::vector<JPMTCalibration_t> JDETECTOR::JPMTCalibration

PMT calibration.

Definition at line 241 of file JDetectorCalibration.hh.

◆ JModulePosition

typedef std::vector<JModulePosition_t> JDETECTOR::JModulePosition

Module position.

Definition at line 242 of file JDetectorCalibration.hh.

◆ JModuleRotation

typedef std::vector<JModuleRotation_t> JDETECTOR::JModuleRotation

Module rotation.

Definition at line 243 of file JDetectorCalibration.hh.

◆ JRateL0_t

typedef double JDETECTOR::JRateL0_t

Type definition of singles rate [Hz].

Definition at line 21 of file JK40Rates.hh.

◆ JRateL1_t

typedef std::vector<double> JDETECTOR::JRateL1_t

Type definition of count rate as a function of multiplicty [Hz] The multiples rate start counting at two-fold coincidences.

Definition at line 27 of file JK40Rates.hh.

◆ multiplicity_type

typedef size_t JDETECTOR::multiplicity_type

Type definition of multiplicity.

Definition at line 33 of file JK40Rates.hh.

◆ JModuleComparator

typedef JLANG::JComparator<double (JVector3D::*)() const> JDETECTOR::JModuleComparator

Type definition of a module comparator using 3D position information.

Definition at line 22 of file JModuleComparator.hh.

◆ JModuleIdentifier

typedef JLANG::JObjectID JDETECTOR::JModuleIdentifier

Definition at line 16 of file JModuleIdentifier.hh.

◆ JPMTParametersMap_t

typedef std::map<JPMTIdentifier, JPMTParameters> JDETECTOR::JPMTParametersMap_t

Type definition of map PMT identifier to PMT parameters.

Definition at line 47 of file JPMTParametersMap.hh.

Function Documentation

◆ operator<() [1/5]

bool JDETECTOR::operator<	(	const JAnchor &	first,
		const JAnchor &	second
	)

inline

Sort anchors in ascending distance from (0,0).

Parameters

first	first anchor
second	second anchor

Returns: true if first anchor closer to (0,0); else false

Definition at line 99 of file JAnchor.hh.

   {
     return first.getLengthSquared() < second.getLengthSquared();
   }

◆ getTime()

template<class T >

double JDETECTOR::getTime	(	const T &	t1,
		const JCalibration &	cal
	)

inline

Get calibrated time.

Parameters

t1	time [ns]
cal	calibration

Returns: time [ns]

Definition at line 202 of file JDetector/JCalibration.hh.

   {
     return JCalibrator<T>::getTime(t1, cal);
   }

◆ putTime()

template<class T >

double JDETECTOR::putTime	(	const T &	t1,
		const JCalibration &	cal
	)

inline

Get de-calibrated time.

Parameters

t1	time [ns]
cal	calibration

Returns: time [ns]

Definition at line 216 of file JDetector/JCalibration.hh.

   {
     return JCalibrator<T>::putTime(t1, cal);
   }

◆ getToT()

template<class T >

double JDETECTOR::getToT	(	const T &	tot,
		const JCalibration &	cal
	)

inline

Get calibrated time-over-threshold of hit.

Parameters

tot	time-over-threshold [ns]
cal	calibration

Returns: time-over-threshold [ns]

Definition at line 230 of file JDetector/JCalibration.hh.

   {
     return JCalibrator<T>::getToT(tot, cal);
   }

◆ putToT()

template<class T >

double JDETECTOR::putToT	(	const T &	tot,
		const JCalibration &	cal
	)

inline

Get de-calibrated time-over-threshold of hit.

Parameters

tot	time-over-threshold [ns]
cal	calibration

Returns: time-over-threshold [ns]

Definition at line 244 of file JDetector/JCalibration.hh.

   {
     return JCalibrator<T>::putToT(tot, cal);
   }

◆ reset()

void JDETECTOR::reset	(	JCLBInput &	data,
		size_t	size
	)

inline

Reset CLB buffers.

Parameters

data	CLB input data
size	number of buffers

Definition at line 41 of file JCLBSimulator.hh.

   {
     data.resize(size);
  
     for (JCLBInput::iterator i = data.begin(); i != data.end(); ++i) {
       i->clear();
     }
   }  

◆ hasDetector() [1/3]

bool JDETECTOR::hasDetector	(	JType< JPPM_DU_t >	type,
		const int	id
	)

Check validity of detector identifier.

Parameters

type	detector type
id	detector identifier

Returns: true if valid match; else false

Definition at line 52 of file JDetectorAddressMapToolkit.hh.

52 { return id == 1; }

◆ hasDetector() [2/3]

bool JDETECTOR::hasDetector	(	JType< JKM3NeT_t >	type,
		const int	id
	)

Definition at line 53 of file JDetectorAddressMapToolkit.hh.

53 { return id >= 2 && id <= 100000; }

◆ hasDetector() [3/3]

bool JDETECTOR::hasDetector	(	JType< JMonteCarlo_t >	type,
		const int	id
	)

Definition at line 54 of file JDetectorAddressMapToolkit.hh.

54 { return id >= -100000 && id <= -2; }

◆ getDetectorAddressMap() [1/2]

template<class JDetector_t >

JDetectorAddressMap& JDETECTOR::getDetectorAddressMap ( )

inline

Get detector address map.

Returns: detector address map

Definition at line 363 of file JDetectorAddressMapToolkit.hh.

   {
     static JTemplateDetectorAddressMap<JDetector_t> demo;
  
     return demo;
   }

◆ getModuleAddressMap()

template<class JDetector_t >

JModuleAddressMap& JDETECTOR::getModuleAddressMap ( int id )

inline

Get module address map.

Parameters

id	module identifier

Returns: module address map

Definition at line 378 of file JDetectorAddressMapToolkit.hh.

   {
     return getDetectorAddressMap<JDetector_t>().get(id);
   }

◆ getPMTAddressTranslator()

template<class JDetector_t >

const JPMTAddressTranslator& JDETECTOR::getPMTAddressTranslator	(	int	id,
		int	tdc
	)

inline

Get PMT address translator for given module identifier and TDC channel.

Parameters

id	module identifier
tdc	TDC

Returns: PMT address translator

Definition at line 392 of file JDetectorAddressMapToolkit.hh.

   {
     return getModuleAddressMap<JDetector_t>(id).getAddressTranslator(tdc);
   }

◆ getPMTLogicalIndex()

template<class JDetector_t >

int JDETECTOR::getPMTLogicalIndex	(	int	id,
		int	tdc
	)

inline

Get PMT logical index for given module identifier and TDC channel.

Parameters

id	module identifier
tdc	TDC

Returns: PMT logical index

Definition at line 406 of file JDetectorAddressMapToolkit.hh.

   {
     return getModuleAddressMap<JDetector_t>(id).getIndex(tdc);
   }

◆ getDetectorAddressMap() [2/2]

JDetectorAddressMap& JDETECTOR::getDetectorAddressMap ( const int id )

inline

Get detector address map.

Parameters

id	detector identifier

Returns: detector address map

Definition at line 487 of file JDetectorAddressMapToolkit.hh.

   {
     return JDetectorAddressMap_t<JDetectorTypes_t>::get(id);
   }

◆ hasDetectorAddressMap()

bool JDETECTOR::hasDetectorAddressMap ( const int id )

inline

Check if detector address map is available.

Parameters

id	detector identifier

Returns: true if detector address map available; else false

Definition at line 499 of file JDetectorAddressMapToolkit.hh.

   {
     return JDetectorAddressMap_t<JDetectorTypes_t>::has(id);
   }

◆ is_valid()

bool JDETECTOR::is_valid ( const json & js )

inline

Check validity of JSon data.

Parameters

js JSon data

Returns: true if valid; else false

Definition at line 63 of file JDetectorCalibration.hh.

   {
     return js.contains(Result_t)  &&  js[Result_t] == OK_t;
   }

◆ to_json() [1/3]

void JDETECTOR::to_json	(	json &	js,
		const JPMTCalibration_t &	object
	)

inline

Convert PMT calibration to JSon.

Parameters

js	json
object	PMT calibration

Definition at line 103 of file JDetectorCalibration.hh.

   {
     js = json{ { PMTSerial_t, object.getID() },
                { T0_t,        object.getT0() } };
   }

◆ from_json() [1/3]

void JDETECTOR::from_json	(	const json &	js,
		JPMTCalibration_t &	object
	)

inline

Convert JSon to PMT calibration.

Parameters

js	json
object	PMT calibration

Definition at line 116 of file JDetectorCalibration.hh.

   {
     object.setID(js.at(PMTSerial_t).get<int>());
  
     object.setT0(js.at(T0_t).get<double>());
   }

◆ to_json() [2/3]

void JDETECTOR::to_json	(	json &	js,
		const JModulePosition_t &	object
	)

inline

Convert module position to JSon.

Parameters

js	json
object	module position

Definition at line 157 of file JDetectorCalibration.hh.

   {
     js = json{ { DOMId_t, object.getID() },
                { PX_t,    object.getX()  },
                { PY_t,    object.getY()  },
                { PZ_t,    object.getZ()  } };
   }

◆ from_json() [2/3]

void JDETECTOR::from_json	(	const json &	js,
		JModulePosition_t &	object
	)

inline

Convert JSon to module position.

Parameters

js	json
object	module position

Definition at line 172 of file JDetectorCalibration.hh.

   {
     object.setID(js.at(DOMSerial_t).get<int>());
  
     object.setPosition(JPosition3D(js.at(PX_t).get<double>(),
                                    js.at(PY_t).get<double>(),
                                    js.at(PZ_t).get<double>()));
   }

◆ to_json() [3/3]

void JDETECTOR::to_json	(	json &	js,
		const JModuleRotation_t &	object
	)

inline

Convert module rotation to JSon.

Parameters

js	json
object	module rotation

Definition at line 215 of file JDetectorCalibration.hh.

   {
     js = json{ { DOMId_t, object.getID() },
                { Q0_t,    object.getA()  },
                { QX_t,    object.getB()  },
                { QY_t,    object.getC()  },
                { QZ_t,    object.getD()  } };
   }

◆ from_json() [3/3]

void JDETECTOR::from_json	(	const json &	js,
		JModuleRotation_t &	object
	)

inline

Convert JSon to module rotation.

Parameters

js	json
object	module rotation

Definition at line 231 of file JDetectorCalibration.hh.

   {
     object.setID(js.at(DOMSerial_t).get<int>());
  
     object.setQuaternion(JQuaternion3D(js.at(Q0_t).get<double>(),
                                        js.at(QX_t).get<double>(),
                                        js.at(QY_t).get<double>(),
                                        js.at(QZ_t).get<double>()));
   }

◆ getARCADetectorHeader()

JDetectorHeader JDETECTOR::getARCADetectorHeader ( )

inline

Get detector header for ARCA.

Returns: detector header

Definition at line 223 of file JDetectorHeader.hh.

   {
     return JDetectorHeader(JUTCTimeRange(0.0, 999999999999.9),
                            JUTMGrid     ("UTM", "WGS84", "33N"),
                            JUTMPosition (587600, 4016800, -3450));
   }

◆ getORCADetectorHeader()

JDetectorHeader JDETECTOR::getORCADetectorHeader ( )

inline

Get detector header for ORCA.

Returns: detector header

Definition at line 235 of file JDetectorHeader.hh.

   {
     return JDetectorHeader(JUTCTimeRange(0.0, 999999999999.9),
                            JUTMGrid     ("UTM", "WGS84", "32N"),
                            JUTMPosition (256500, 4743000, -2425));
   }

◆ getMaximalDistance()

double JDETECTOR::getMaximalDistance ( const JDetector & detector )

inline

Get maximal distance between modules in detector.

Parameters

detector detector

Returns: maximal distance [m]

Definition at line 76 of file JDetectorToolkit.hh.

   {
     double dmax = 0.0;
     
     for (JDetector::const_iterator i = detector.begin(); i != detector.end(); ++i) {
       for (JDetector::const_iterator j = detector.begin(); j != i; ++j) {
         if (i->getDistance(*j) > dmax) {
           dmax = i->getDistance(*j);
         }
       }
     }
     
     return dmax;
   }

◆ GetXrotationG4()

double JDETECTOR::GetXrotationG4 ( const JVersor3D dir )

inline

Get rotation over X axis in Geant4 coordinate system.

Parameters

dir direction

Returns: X-rotation [deg]

Definition at line 98 of file JDetectorToolkit.hh.

   {
     const double phi = atan2(dir.getDY(), dir.getDZ())*(180.0/PI);
  
     if (phi < 0.0){
       return phi + 360.0;
     }
     else{
       return phi;       
     }
   }

◆ GetYrotationG4()

double JDETECTOR::GetYrotationG4 ( const JVersor3D dir )

inline

Get rotation over Y axis in Geant4 coordinate system.

Parameters

dir direction

Returns: Y-rotation [deg]

Definition at line 117 of file JDetectorToolkit.hh.

   {
     return asin(-dir.getDX())*(180.0/PI);
   }

◆ read_gdml()

void JDETECTOR::read_gdml	(	std::istream &	,
		const JDetector &
	)

inline

Definition at line 123 of file JDetectorToolkit.hh.

124 {}

◆ write_gdml()

void JDETECTOR::write_gdml	(	std::ostream &	out,
		const JDetector &	detector
	)

inline

Writes KM3Sim GDML input file from detector.

Parameters

out	output stream
detector	detector

Definition at line 133 of file JDetectorToolkit.hh.

   {
       
  
     const JCylinder3D cylinder(detector.begin(), detector.end());
  
     // Detector height is bascially just a distance between the highest and the lowest DOM
     //double Detector_Height = cylinder.getZmax() - cylinder.getZmin();
     // Distance from the center of the lowest DOM to the seabed
     //double Seabed_Distance = cylinder.getZmin();
                 
     // To translate Z coordinate from detx format which corresponds to the distance from the seabed one has to perform a following calculation
     // Dom_Z_GDML = Dom_Z_Detx - Distance to the seabed from the lowest DOM - Detector_height/2
  
     //double DistanceOfSeabedFromLowestOM = Seabed_Distance;
     // For now, the size of the WorldBox is fixed to 2200 meters
     const double WorldBoxHeight = 2200.;
     // Below formula comes directly from the note by Apostolos
     //double Crust_Z_size = WorldBoxHeight/2-Detector_Height/2-DistanceOfSeabedFromLowestOM; Formula for obsolete coordinate covention, where Z_seabed != 0
     const double Crust_Z_size = WorldBoxHeight/2;
     //double Crust_Z_position = -WorldBoxHeight/4-Detector_Height/4-DistanceOfSeabedFromLowestOM/2; Formula for obsolete coordinate covention, where Z_seabed != 0
     const double Crust_Z_position= -WorldBoxHeight/4;
                 
  
     out<<"<?xml version=\"1.0\" encoding=\"UTF-8\" ?>\n<gdml xmlns:gdml=\"http://cern.ch/2001/Schemas/GDML\" xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xsi:noNamespaceSchemaLocation=\"";
     if(!GDML_SCHEMA){
       std::cout<<"GDML_SCHEMA_DIR NOT DEFINED! Setting default path"<<std::endl;
       out<<"/sps/km3net/users/jmanczak/km3sim/geant4.10.05/source/persistency/gdml/schema/gdml.xsd\">\n\n\n";
     }
     else{
       out<<GDML_SCHEMA<<"gdml.xsd\">\n\n\n";
     }
     out<<"<define>\n";
     out<<"<rotation name=\"identity\"/>\n<position name=\"zero\"/>\n";
  
     int PMTs_NO = 0;
     for (JDetector::const_iterator module = detector.begin(); module != detector.end(); ++module) {
                         
       const JFIT::JEstimator<JPoint3D> center(module->begin(), module->end());
  
       //out<<"<position name=\"PosString"<<module->getString()<<"_Dom"<<module->getID()<<"\" unit=\"m\" x=\""<<module->getX()<<"\" y=\""<<module->getY()<<"\" z=\""<<module->getZ() - Seabed_Distance-Detector_Height/2<<"\"/>\n"; Formula for obsolete coordinate covention, where Z_seabed != 0
       out<<"<position name=\"PosString"<<module->getString()<<"_Dom"<<module->getID()<<"\" unit=\"m\" x=\""<<module->getX()<<"\" y=\""<<module->getY()<<"\" z=\""<<module->getZ()<<"\"/>\n";
                                         
       for (JModule::const_iterator pmt = module->begin(); pmt != module->end(); ++pmt) {
         //JVector3D vec;
         //static_cast<JVector3D> (vec) = module->sub(*pmt);
                                 
         const JVector3D vec = static_cast<JVector3D>(*pmt).sub(center);
         out<<"<position name=\"CathodPosition"<<pmt->getID()<<"_"<<module->getID()<<"\" unit=\"m\" x=\""<<vec.getX()<<"\" y=\""<<vec.getY()<<"\" z=\""<<vec.getZ()<<"\"/>\n";
         out<<"<rotation name=\"CathodRotation"<<pmt->getID()<<"_"<<module->getID()<<"\" unit=\"deg\" x=\""<<GetXrotationG4(*pmt)<<"\" y=\""<<GetYrotationG4(*pmt)<<"\" z=\"0.000000\"/>\n";
         out<<"<constant name=\"CathodID_"<<PMTs_NO<<"\" value=\""<<pmt->getID()<<"\"/>\n";
         PMTs_NO++;
       }
                         
     }
  
     out<<"<position name=\"OMShift\" unit=\"m\" x=\"0\" y=\"0\" z=\"0.0392\"/>\n";
     out<<"\n\n\n";
     out<<"<!-- end of DU position definitions -->\n<position name=\"CrustPosition\"   unit=\"m\" x=\"0\" y=\"0\" z=\""<<Crust_Z_position<<"\"/>\n";
                 
     out<<"</define>\n";
     out<<"<materials>\n";
     out<<"</materials>\n";
     out<<"<solids>\n";
     out<<"      <box name=\"WorldBox\" lunit=\"m\" x=\"2200\" y=\"2200\" z=\"2200\"/>\n";
     out<<"      <box name=\"CrustBox\" lunit=\"m\" x=\"2200\" y=\"2200\" z=\""<<Crust_Z_size<<"\"/>\n";
     out<<"      <box name=\"StoreyBox\" lunit=\"m\" x=\"0.6\" y=\"0.6\" z=\"0.6\"/>\n";
     out<<"      <sphere name=\"OMSphere\" lunit=\"cm\" aunit=\"deg\" rmin=\"0.0\" rmax=\"21.6\" startphi=\"0.0\" deltaphi=\"360.0\" starttheta=\"0.0\" deltatheta=\"180.0\"/>\n";
     out<<"      <tube name=\"CathodTube\" lunit=\"cm\" aunit=\"deg\" rmin=\"0.0\" rmax=\"4.7462\" z=\"0.5\" startphi=\"0.0\" deltaphi=\"360.0\"/>\n";
     out<<"</solids>\n\n\n";
                 
     out<<"<structure>\n";
     out<<"      <volume name=\"CathodVolume\">\n";
     out<<"              <materialref ref=\"Cathod\"/>\n";
     out<<"              <solidref ref=\"CathodTube\"/>\n";
     out<<"      </volume>\n";
  
     out<<"<!-- OMVolume(s) construction -->\n";
  
     for (JDetector::const_iterator module = detector.begin(); module != detector.end(); ++module) {
  
       out<<"    <volume name=\"OMVolume"<<module->getID()<<"\">\n";
       out<<"            <materialref ref=\"Water\"/>\n";
       out<<"            <solidref ref=\"OMSphere\"/>\n";
  
       for (JModule::const_iterator pmt = module->begin(); pmt != module->end(); ++pmt) {
         out<<"          <physvol>\n";
         out<<"                  <volumeref ref=\"CathodVolume\"/>\n";
         out<<"                  <positionref ref=\"CathodPosition"<<pmt->getID()<<"_"<<module->getID()<<"\"/>\n";
         out<<"                  <rotationref ref=\"CathodRotation"<<pmt->getID()<<"_"<<module->getID()<<"\"/>\n";
         out<<"          </physvol>\n";
       }
  
       out<<"    </volume>\n";
     }
  
     out<<"<!-- StoreyVolume(s) construction -->\n";
  
     for (JDetector::const_iterator module = detector.begin(); module != detector.end(); ++module) {
       out<<"    <volume name=\"StoreyVolume"<<module->getID()<<"\">\n";
       out<<"            <materialref ref=\"Water\"/>\n";
       out<<"            <solidref ref=\"StoreyBox\"/>\n";
       out<<"            <physvol>\n";
       out<<"                    <volumeref ref=\"OMVolume"<<module->getID()<<"\"/>\n";
       out<<"                    <positionref ref=\"OMShift\"/>\n";
       //out<<"                  <positionref ref=\"zero\"/>\n";
       out<<"                    <rotationref ref=\"identity\"/>\n";
       out<<"            </physvol>\n";
       out<<"    </volume>\n";
     }
  
     out<<"<!-- Crust Volume construction-->\n";
     out<<"<volume name=\"CrustVolume\">\n";
     out<<"      <materialref ref=\"Crust\"/>\n";
     out<<"      <solidref ref=\"CrustBox\"/>\n";
     out<<"</volume>\n";
  
     out<<"<!-- World Volume construction-->\n";
     out<<"<volume name=\"WorldVolume\">\n";
     out<<"      <materialref ref=\"Water\"/>\n";
     out<<"      <solidref ref=\"WorldBox\"/>\n";
  
     out<<"      <physvol>\n";
     out<<"              <volumeref ref=\"CrustVolume\"/>\n";
     out<<"              <positionref ref=\"CrustPosition\"/>\n";
     out<<"              <rotationref ref=\"identity\"/>\n";
     out<<"      </physvol>\n";
  
     for (JDetector::const_iterator module = detector.begin(); module != detector.end(); ++module) {
       out<<"    <physvol>\n";
       out<<"            <volumeref ref=\"StoreyVolume"<<module->getID()<<"\"/>\n";
       out<<"            <positionref ref=\"PosString"<< module->getString() <<"_Dom"<< module->getID() <<"\"/>\n";
       //out<<"          <rotation x="{}" y="{}" z="0.0"/>\n'.format(Dom_Phi[i], Dom_Theta[i]))
       out<<"                    <rotationref ref=\"identity\"/>\n";
       out<<"    </physvol>\n";  
     }
  
     out<<"</volume>\n";
  
     out<<"</structure>\n";
     out<<"<setup name=\"Default\" version=\"1.0\">\n";
     out<<"<world ref=\"WorldVolume\"/>\n";
     out<<"</setup>\n";
     out<<"</gdml>\n";
   }

◆ getMaximalTime() [1/2]

double JDETECTOR::getMaximalTime ( const JDetector & detector )

inline

Get maximal time between modules in detector following causality.

Parameters

detector detector

Returns: maximal time [ns]

Definition at line 286 of file JDetectorToolkit.hh.

   {
     return getMaximalDistance(detector) * getIndexOfRefraction() * getInverseSpeedOfLight();
   }

◆ getMaximalTime() [2/2]

double JDETECTOR::getMaximalTime	(	const JDetector &	detector,
		const double	roadWidth_m
	)

inline

Get maximal time between modules in detector following causality.

The road width corresponds to the maximal distance traveled by the light.

Parameters

detector	detector
roadWidth_m	road width [m]

Returns: maximal time [ns]

Definition at line 300 of file JDetectorToolkit.hh.

   {
     const double Dmax_m = getMaximalDistance(detector);
  
     return (sqrt((Dmax_m + roadWidth_m*getSinThetaC()) * 
                  (Dmax_m - roadWidth_m*getSinThetaC()))  +  
             roadWidth_m * getSinThetaC() * getTanThetaC()) * getInverseSpeedOfLight();
   }

◆ getTimeRange() [1/2]

JTimeRange JDETECTOR::getTimeRange	(	const JTimeRange &	timeRange,
		const JModule &	module
	)

inline

Get de-calibrated time range.

The de-calibrated time range is corrected for minimal and maximal time offset of PMTs in given module.

Parameters

timeRange	time range [ns]
module	module

Returns: time range [ns]

Definition at line 319 of file JDetectorToolkit.hh.

   {
     if (!module.empty()) {
  
       JTimeRange time_range(JTimeRange::DEFAULT_RANGE);
       
       for (JModule::const_iterator pmt = module.begin(); pmt != module.end(); ++pmt) {
         
         const JCalibration& calibration = pmt->getCalibration();
         
         time_range.include(putTime(timeRange.getLowerLimit(), calibration));
         time_range.include(putTime(timeRange.getUpperLimit(), calibration));
       }
       
       return time_range;
  
     } else {
       
       return timeRange;
     }
   }

◆ getNumberOfPMTs() [1/2]

int JDETECTOR::getNumberOfPMTs ( const JModule & module )

inline

Get number of PMTs.

Parameters

module module

Returns: number of PMTs

Definition at line 348 of file JDetectorToolkit.hh.

   {
     return module.size();
   }

◆ getNumberOfPMTs() [2/2]

int JDETECTOR::getNumberOfPMTs ( const JDetector & detector )

inline

Get number of PMTs.

Parameters

detector detector

Returns: number of PMTs

Definition at line 360 of file JDetectorToolkit.hh.

   {
     int number_of_pmts = 0;
     
     for (JDetector::const_iterator module = detector.begin(); module != detector.end(); ++module) {
       number_of_pmts += getNumberOfPMTs(*module);
     }
  
     return number_of_pmts;
   }

◆ getNumberOfStrings()

int JDETECTOR::getNumberOfStrings ( const JDetector & detector )

inline

Get number of strings.

Parameters

detector detector

Returns: number of strings

Definition at line 378 of file JDetectorToolkit.hh.

   {
     std::set<int> buffer;
     
     for (JDetector::const_iterator module = detector.begin(); module != detector.end(); ++module) {
       buffer.insert(module->getString());
     }
  
     return buffer.size();
   }

◆ getStringIDs()

std::set<int> JDETECTOR::getStringIDs ( const JDetector & detector )

inline

Get list of strings IDs.

Parameters

detector detector

Returns: list of string IDs

Definition at line 396 of file JDetectorToolkit.hh.

   {
     std::set<int> buffer;
     
     for (JDetector::const_iterator module = detector.begin(); module != detector.end(); ++module) {
       buffer.insert(module->getString());
     }
  
     return buffer;
   }

◆ getNumberOfFloors()

int JDETECTOR::getNumberOfFloors ( const JDetector & detector )

inline

Get number of floors.

Parameters

detector detector

Returns: number of floors

Definition at line 414 of file JDetectorToolkit.hh.

   {
     std::set<int> buffer;
     
     for (JDetector::const_iterator module = detector.begin(); module != detector.end(); ++module) {
       buffer.insert(module->getFloor());
     }
  
     return buffer.size();
   }

◆ getNumberOfModules()

int JDETECTOR::getNumberOfModules ( const JDetector & detector )

inline

Get number of modules.

Parameters

detector detector

Returns: number of modules

Definition at line 432 of file JDetectorToolkit.hh.

   {
     std::set<int> buffer;
     
     for (JDetector::const_iterator module = detector.begin(); module != detector.end(); ++module) {
       buffer.insert(module->getID());
     }
  
     return buffer.size();
   }

◆ load()

void JDETECTOR::load	(	const JString &	file_name,
		JDetector &	detector
	)

inline

Load detector from input file.

Supported file formats:

ASCII file, extension JDETECTOR::GENDET_DETECTOR_FILE_FORMAT, gendet format;
binary file, extension JDETECTOR::BINARY_DETECTOR_FILE_FORMAT, Jpp internal format;
ASCII file, extension JDETECTOR::KM3NET_DETECTOR_FILE_FORMAT, KM3NeT standard format;
gzipped file, extension JDETECTOR::ZIPPED_DETECTOR_FILE_FORMAT, KM3NeT standard format;

Parameters

file_name	file name
detector	detector

Definition at line 456 of file JDetectorToolkit.hh.

   {
     using namespace std;
     using namespace JIO;
     
     if      (file_name.endsWith(GENDET_DETECTOR_FILE_FORMAT)) {
  
       JMonteCarloDetector buffer(true);
  
       ifstream in(file_name.c_str());
  
       if (!in) {
         THROW(JFileOpenException, "File not opened: " << file_name);
       }
       
       in >> buffer;
  
       in.close();
  
       detector.swap(buffer);
  
     } else if (file_name.endsWith(BINARY_DETECTOR_FILE_FORMAT)) {
  
       JFileStreamReader in(file_name.c_str());
  
       if (!in) {
         THROW(JFileOpenException, "File not opened: " << file_name);
       }
       
       detector.read(in);
  
       in.close();
  
     } else if (file_name.endsWith(KM3NET_DETECTOR_FILE_FORMAT)) {
       
       ifstream in(file_name.c_str());
  
       if (!in) {
         THROW(JFileOpenException, "File not opened: " << file_name);
       }
       
       in >> detector;
  
       in.close();
  
     } else if (file_name.endsWith(ZIPPED_DETECTOR_FILE_FORMAT)) {
       
       igzstream in(file_name.c_str());
  
       if (!in) {
         THROW(JFileOpenException, "File not opened: " << file_name);
       }
       
       in >> detector;
  
       in.close();
  
     } else {
  
       THROW(JProtocolException, "Protocol not defined: " << file_name);
     }
   }

◆ store()

void JDETECTOR::store	(	const JString &	file_name,
		const JDetector &	detector
	)

inline

Store detector to output file.

Supported file formats:

binary file, extension JDETECTOR::BINARY_DETECTOR_FILE_FORMAT, Jpp internal format;
ASCII file, extension JDETECTOR::KM3NET_DETECTOR_FILE_FORMAT, KM3NeT standard format;
gzipped file, extension JDETECTOR::ZIPPED_DETECTOR_FILE_FORMAT, KM3NeT standard format;
gdml file, extension JDETECTOR::GDML_DETECTOR_FILE_FORMAT, KM3Sim input format;

Parameters

file_name	file name
detector	detector

Definition at line 532 of file JDetectorToolkit.hh.

   {
     using namespace std;
     using namespace JIO;
     
     if        (file_name.endsWith(BINARY_DETECTOR_FILE_FORMAT)) {
  
       JFileStreamWriter out(file_name.c_str());
  
       detector.write(out);
  
       out.close();
  
     } else if (file_name.endsWith(KM3NET_DETECTOR_FILE_FORMAT)) {
       
       std::ofstream out(file_name.c_str());
  
       out << detector;
  
       out.close();
  
     } else if (file_name.endsWith(ZIPPED_DETECTOR_FILE_FORMAT)) {
       
       ogzstream out(file_name.c_str());
  
       out << detector;
  
       out.close();
  
     } else if (file_name.endsWith(GDML_DETECTOR_FILE_FORMAT)) {
       
       std::ofstream out(file_name.c_str());
  
       write_gdml(out, detector);
  
       out.close();
  
     }  else {
  
       throw JProtocolException("Protocol not defined.");
     }
   }

◆ getModule() [1/2]

const JModule& JDETECTOR::getModule	(	const JModuleAddressMap &	memo,
		const int	id,
		const JModuleLocation &	location = `JModuleLocation()`
	)

inline

Get module according module address map.

Parameters

memo	module address map
id	module identifier
location	module location

Returns: module

Definition at line 584 of file JDetectorToolkit.hh.

   {
     static JModule module;
  
  
     module.setID(id);
  
     module.setLocation(location);
  
     module.resize(memo.size());
     
     if (memo.has( 0)) { module[memo[ 0].tdc] = JPMT( 1, JAxis3D(JVector3D(+0.000, +0.000, -0.200), JVersor3D(+0.000, +0.000, -1.000))); }    
  
     if (memo.has( 1)) { module[memo[ 1].tdc] = JPMT( 2, JAxis3D(JVector3D(+0.000, +0.105, -0.170), JVersor3D(+0.000, +0.527, -0.850))); }
     if (memo.has( 2)) { module[memo[ 2].tdc] = JPMT( 3, JAxis3D(JVector3D(+0.091, +0.053, -0.170), JVersor3D(+0.456, +0.263, -0.850))); }
     if (memo.has( 3)) { module[memo[ 3].tdc] = JPMT( 4, JAxis3D(JVector3D(+0.091, -0.053, -0.170), JVersor3D(+0.456, -0.263, -0.850))); }
     if (memo.has( 4)) { module[memo[ 4].tdc] = JPMT( 5, JAxis3D(JVector3D(+0.000, -0.105, -0.170), JVersor3D(+0.000, -0.527, -0.850))); }
     if (memo.has( 5)) { module[memo[ 5].tdc] = JPMT( 6, JAxis3D(JVector3D(-0.091, -0.053, -0.170), JVersor3D(-0.456, -0.263, -0.850))); }
     if (memo.has( 6)) { module[memo[ 6].tdc] = JPMT( 7, JAxis3D(JVector3D(-0.091, +0.053, -0.170), JVersor3D(-0.456, +0.263, -0.850))); }
  
     if (memo.has( 7)) { module[memo[ 7].tdc] = JPMT( 8, JAxis3D(JVector3D(+0.083, +0.144, -0.111), JVersor3D(+0.416, +0.720, -0.555))); }
     if (memo.has( 8)) { module[memo[ 8].tdc] = JPMT( 9, JAxis3D(JVector3D(+0.166, +0.000, -0.111), JVersor3D(+0.832, +0.000, -0.555))); }
     if (memo.has( 9)) { module[memo[ 9].tdc] = JPMT(10, JAxis3D(JVector3D(+0.083, -0.144, -0.111), JVersor3D(+0.416, -0.720, -0.555))); }
     if (memo.has(10)) { module[memo[10].tdc] = JPMT(11, JAxis3D(JVector3D(-0.083, -0.144, -0.111), JVersor3D(-0.416, -0.720, -0.555))); }
     if (memo.has(11)) { module[memo[11].tdc] = JPMT(12, JAxis3D(JVector3D(-0.166, +0.000, -0.111), JVersor3D(-0.832, +0.000, -0.555))); }
     if (memo.has(12)) { module[memo[12].tdc] = JPMT(13, JAxis3D(JVector3D(-0.083, +0.144, -0.111), JVersor3D(-0.416, +0.720, -0.555))); }
  
     if (memo.has(13)) { module[memo[13].tdc] = JPMT(14, JAxis3D(JVector3D(+0.000, +0.191, -0.059), JVersor3D(+0.000, +0.955, -0.295))); }
     if (memo.has(14)) { module[memo[14].tdc] = JPMT(15, JAxis3D(JVector3D(+0.165, +0.096, -0.059), JVersor3D(+0.827, +0.478, -0.295))); }
     if (memo.has(15)) { module[memo[15].tdc] = JPMT(16, JAxis3D(JVector3D(+0.165, -0.096, -0.059), JVersor3D(+0.827, -0.478, -0.295))); }
     if (memo.has(16)) { module[memo[16].tdc] = JPMT(17, JAxis3D(JVector3D(+0.000, -0.191, -0.059), JVersor3D(+0.000, -0.955, -0.295))); }
     if (memo.has(17)) { module[memo[17].tdc] = JPMT(18, JAxis3D(JVector3D(-0.165, -0.096, -0.059), JVersor3D(-0.827, -0.478, -0.295))); }
     if (memo.has(18)) { module[memo[18].tdc] = JPMT(19, JAxis3D(JVector3D(-0.165, +0.096, -0.059), JVersor3D(-0.827, +0.478, -0.295))); }
  
     if (memo.has(19)) { module[memo[19].tdc] = JPMT(20, JAxis3D(JVector3D(+0.096, +0.165, +0.059), JVersor3D(+0.478, +0.827, +0.295))); }
     if (memo.has(20)) { module[memo[20].tdc] = JPMT(21, JAxis3D(JVector3D(+0.191, +0.000, +0.059), JVersor3D(+0.955, +0.000, +0.295))); }
     if (memo.has(21)) { module[memo[21].tdc] = JPMT(22, JAxis3D(JVector3D(+0.096, -0.165, +0.059), JVersor3D(+0.478, -0.827, +0.295))); }
     if (memo.has(22)) { module[memo[22].tdc] = JPMT(23, JAxis3D(JVector3D(-0.096, -0.165, +0.059), JVersor3D(-0.478, -0.827, +0.295))); }
     if (memo.has(23)) { module[memo[23].tdc] = JPMT(24, JAxis3D(JVector3D(-0.191, +0.000, +0.059), JVersor3D(-0.955, +0.000, +0.295))); }
     if (memo.has(24)) { module[memo[24].tdc] = JPMT(25, JAxis3D(JVector3D(-0.096, +0.165, +0.059), JVersor3D(-0.478, +0.827, +0.295))); }
  
     if (memo.has(25)) { module[memo[25].tdc] = JPMT(26, JAxis3D(JVector3D(+0.000, +0.166, +0.111), JVersor3D(+0.000, +0.832, +0.555))); }
     if (memo.has(26)) { module[memo[26].tdc] = JPMT(27, JAxis3D(JVector3D(+0.144, +0.083, +0.111), JVersor3D(+0.720, +0.416, +0.555))); }
     if (memo.has(27)) { module[memo[27].tdc] = JPMT(28, JAxis3D(JVector3D(+0.144, -0.083, +0.111), JVersor3D(+0.720, -0.416, +0.555))); }
     if (memo.has(28)) { module[memo[28].tdc] = JPMT(29, JAxis3D(JVector3D(+0.000, -0.166, +0.111), JVersor3D(+0.000, -0.832, +0.555))); }
     if (memo.has(29)) { module[memo[29].tdc] = JPMT(30, JAxis3D(JVector3D(-0.144, -0.083, +0.111), JVersor3D(-0.720, -0.416, +0.555))); }
     if (memo.has(30)) { module[memo[30].tdc] = JPMT(31, JAxis3D(JVector3D(-0.144, +0.083, +0.111), JVersor3D(-0.720, +0.416, +0.555))); }
  
     module.compile();
  
     return module;
   }

◆ getModule() [2/2]

const JModule& JDETECTOR::getModule	(	const int	id,
		const JModuleLocation &	location = `JModuleLocation()`
	)

inline

Get module corresponding to Antares storey.

Parameters

id	module identifier
location	module location

Returns: module

Definition at line 647 of file JDetectorToolkit.hh.

   {
     using JTOOLS::PI;
  
     static JModule module;
  
     module.setID(id);
  
     module.setLocation(location);
  
     if (module.empty()) {
  
       module.resize(3);
       
       const double R  = 0.5;           // [m]
       
       const double st = sin(0.75*PI);
       const double ct = cos(0.75*PI);
       
       for (int i = 0; i != 3; ++i) {
         
         const double phi = (2.0*PI*i) / 3.0;
         const double cp  = cos(phi);
         const double sp  = sin(phi);
         
         module[i] = JPMT(i, JAxis3D(JVector3D(R*st*cp, R*st*sp, R*ct), JVersor3D(st*cp, st*sp, ct)));
       }
     }
  
     return module;
   }

◆ getModuleLabel()

std::string JDETECTOR::getModuleLabel ( const JModuleLocation & location )

inline

Get module label for monitoring and other applications.

\ The format is "(XXX,YY)", where XXX is the string number and YY the floor.

Parameters

location module location \retun label

Definition at line 688 of file JDetectorToolkit.hh.

   {
     using namespace std;
   
     ostringstream os;
     
     os << "(" << setfill('0') << setw(3) << location.getString() << "," << setfill('0') << setw(2) << location.getFloor() << ")";
  
     return os.str();
   }

◆ getPosition()

JPosition3D JDETECTOR::getPosition	(	const JModule &	first,
		const JModule &	second
	)

inline

Get position to go from first to second module.

Parameters

first	first module
second	second module

Returns: position

Definition at line 833 of file JDetectorToolkit.hh.

   {
     return second.getPosition() - first.getPosition();
   }

◆ getCalibration()

JCalibration JDETECTOR::getCalibration	(	const JCalibration &	first,
		const JCalibration &	second
	)

inline

Get calibration to go from first to second calibration.

Parameters

first	first calibration
second	second calibration

Returns: calibration

Definition at line 846 of file JDetectorToolkit.hh.

   {
     return JCalibration(second.getT0() - first.getT0());
   }

◆ getDetectorVersions() [1/3]

std::vector<std::string> JDETECTOR::getDetectorVersions ( const JType< std::string > & type )

inline

Get detector versions.

Note that the order of the versions is descending.

Parameters

type type

Returns: versions

Definition at line 183 of file JDetectorVersion.hh.

   {
     return JLANG::make_array(putDetectorVersion.rbegin(), putDetectorVersion.rend(), &JPutDetectorVersion::value_type::second);
   }

◆ getDetectorVersions() [2/3]

std::vector<JDetectorVersion::JVersion_t> JDETECTOR::getDetectorVersions ( const JType< JDetectorVersion::JVersion_t > & type )

inline

Get detector versions.

Note that the order of the versions is descending.

Parameters

type type

Returns: versions

Definition at line 197 of file JDetectorVersion.hh.

   {
     return JLANG::make_array(putDetectorVersion.rbegin(), putDetectorVersion.rend(), &JPutDetectorVersion::value_type::first);
   }

◆ getDetectorVersions() [3/3]

template<class T >

std::vector<T> JDETECTOR::getDetectorVersions ( )

inline

Get detector versions.

Returns: versions

Definition at line 209 of file JDetectorVersion.hh.

   {
     return getDetectorVersions(JType<T>());
   }

◆ setAttributes()

template<class JAttributes_t >

void JDETECTOR::setAttributes	(	const JModule &	first,
		const JModule &	second,
		JAttributes_t &	attributes
	)

Template method to set module attributes.

This method should be overloaded for each type of module attributes.

Parameters

first	first module
second	second module
attributes	module attributes

◆ setAttributes< JNullType >()

template<>

void JDETECTOR::setAttributes< JNullType >	(	const JModule &	first,
		const JModule &	second,
		JNullType &	attributes
	)

Template specialisation to set no attributes for the default empty object.

Parameters

first	first module
second	second module
attributes	module attributes

Definition at line 48 of file JModuleMapper.hh.

51 {}

◆ getPMTStatusBits() [1/3]

std::vector<std::string> JDETECTOR::getPMTStatusBits ( const JType< std::string > & type )

inline

Get PMT status bits.

Parameters

type type

Returns: status bits

Definition at line 362 of file JPMT.hh.

   {
     return JPP::make_array(getPMTStatusBit.begin(), getPMTStatusBit.end(), &JGetPMTStatusBit::value_type::first);
   }

◆ getPMTStatusBits() [2/3]

std::vector<JPMT::JPMTStatusBits_t> JDETECTOR::getPMTStatusBits ( const JType< JPMT::JPMTStatusBits_t > & type )

inline

Get PMT status bits.

Parameters

type type

Returns: status bits

Definition at line 374 of file JPMT.hh.

   {
     return JPP::make_array(getPMTStatusBit.begin(), getPMTStatusBit.end(), &JGetPMTStatusBit::value_type::second);
   }

◆ getPMTStatusBits() [3/3]

template<class T >

std::vector<T> JDETECTOR::getPMTStatusBits ( )

inline

Get PMT status bits.

Returns: status bits

Definition at line 386 of file JPMT.hh.

   {
     return getPMTStatusBits(JType<T>());
   }

◆ operator<() [2/5]

bool JDETECTOR::operator<	(	const JPMTIdentifier &	first,
		const JPMTIdentifier &	second
	)

inline

Less than operator for PMT identifiers.

Parameters

first	PMT identifier
second	PMT identifier

Returns: true if first PMT lower than second PMT; else false

Definition at line 153 of file JPMTIdentifier.hh.

   {
     if (first.getModuleID() == second.getModuleID())
       return first.getPMTAddress() < second.getPMTAddress();
     else
       return first.getModuleID()   < second.getModuleID();
   }

◆ operator==()

bool JDETECTOR::operator==	(	const JPMTIdentifier &	first,
		const JPMTIdentifier &	second
	)

inline

Equal operator for PMT identifiers.

Parameters

first	PMT identifier
second	PMT identifier

Returns: true if first PMT equal second PMT; else false

Definition at line 169 of file JPMTIdentifier.hh.

   {
     return (first.getModuleID()   == second.getModuleID()  &&
             first.getPMTAddress() == second.getPMTAddress());
   }

◆ getSurvivalProbability()

double JDETECTOR::getSurvivalProbability ( const JPMTParameters & parameters )

inline

Get model dependent probability that a one photo-electron hit survives the simulation of the PMT assuming QE = 1.

Parameters

parameters PMT parameters

Returns: probability

Definition at line 32 of file JPMTParametersToolkit.hh.

   {
     JPMTParameters data = parameters;
     const int      NPE  = 1;
  
     data.QE = 1.0;
  
     return JPMTAnalogueSignalProcessor(data).getSurvivalProbability(NPE);
   }

◆ getHitProbability()

double JDETECTOR::getHitProbability	(	const double	QE,
		const double	mu
	)

inline

Get ratio of hit probabilities for given QE and expectation value of the number of photo-electrons.

The ratio corresponds to the hit probability with given QE divided by that with QE = 1.
The expectation value is defined for a two-fold (or higher) coincidence.

Parameters

QE	QE
mu	expectation value

Returns: ratio

Definition at line 52 of file JPMTParametersToolkit.hh.

   {
     if (mu > 0.0)
       return (1.0 - exp(-QE*mu)) / (1.0 - exp(-mu));
     else
       return QE;
   }

◆ getMaximalHitProbability()

double JDETECTOR::getMaximalHitProbability ( const double mu )

inline

Get maximal ratio of hit probabilities for given QE and expectation value of the number of photo-electrons.

The ratio corresponds to the hit probability with infinite QE divided by that with QE = 1.
The expectation value is defined for a two-fold (or higher) coincidence.

Parameters

mu	expectation value

Returns: ratio

Definition at line 69 of file JPMTParametersToolkit.hh.

   {
     using namespace std;
  
     if (mu > 0.0)
       return 1.0 / (1.0 - exp(-mu));
     else
       return numeric_limits<double>::max();
   }

◆ getQE()

double JDETECTOR::getQE	(	const double	R,
		const double	mu
	)

inline

Get QE for given ratio of hit probabilities and expectation value of the number of photo-electrons.

The ratio corresponds to the hit probability with given QE divided by that with QE = 1.
The expectation value is defined for a two-fold (or higher) coincidence.

Parameters

R	ratio
mu	expectation value

Returns: QE

Definition at line 89 of file JPMTParametersToolkit.hh.

   {
     if (R < getMaximalHitProbability(mu)) {
       
       if (mu > 0.0)
         return -log(1.0 - R*(1.0 - exp(-mu))) / mu;
       else
         return R;
  
     } else {
  
       THROW(JValueOutOfRange, "Inconsistent arguments at method getQE(" << R << "," << mu <<")");
     }
   }

◆ operator<() [3/5]

bool JDETECTOR::operator<	(	const JPhotoElectron &	first,
		const JPhotoElectron &	second
	)

inline

Less than operator for photo-elecrons.

Parameters

first	first photo-electron
second	second photo-electron

Returns: true if first photo-electron earlier than second; else false

Definition at line 67 of file JPMTSimulator.hh.

   {
     return first.t_ns < second.t_ns;
   }

◆ operator<() [4/5]

bool JDETECTOR::operator<	(	const JPMTSignal &	first,
		const JPMTSignal &	second
	)

inline

Less than operator for PMT signals.

Parameters

first	first PMT signal
second	second PMT signal

Returns: true if first PMT signal earlier than second; else false

Definition at line 111 of file JPMTSimulator.hh.

   {
     return first.t_ns < second.t_ns;
   }

◆ operator<() [5/5]

bool JDETECTOR::operator<	(	const JPMTPulse &	first,
		const JPMTPulse &	second
	)

inline

Less than operator for PMT pulses.

Parameters

first	first PMT pulse
second	second PMT pulse

Returns: true if first PMT pulse earlier than second; else false

Definition at line 155 of file JPMTSimulator.hh.

   {
     return first.t_ns < second.t_ns;
   }

◆ getTimeRange() [2/2]

JTimeRange JDETECTOR::getTimeRange ( const JModuleData & input )

inline

Get time range (i.e.

earlist and latest hit time) of module data.

Parameters

input module data

Returns: time range

Definition at line 282 of file JPMTSimulator.hh.

   {
     JTimeRange timeRange(JTimeRange::DEFAULT_RANGE);
  
     for (JModuleData::const_iterator frame = input.begin(); frame != input.end(); ++frame) {
       for (JModuleData::value_type::const_iterator hit = frame->begin(); hit != frame->end(); ++hit) {
         timeRange.include(hit->t_ns);
       }
     }
  
     return timeRange;
   }

Variable Documentation

◆ TIME_OVER_THRESHOLD_NS

const double JDETECTOR::TIME_OVER_THRESHOLD_NS = 26.4

Specification for time-over-threshold corresponding to a one photo-electron pulse.

Definition at line 29 of file JDetector/JCalibration.hh.

◆ Result_t

const std::string JDETECTOR::Result_t = "Result"

static

Detector calibration key words for JSON I/O.

Definition at line 34 of file JDetectorCalibration.hh.

◆ Comment_t

const std::string JDETECTOR::Comment_t = "Comment"

static

Definition at line 35 of file JDetectorCalibration.hh.

◆ Data_t

const std::string JDETECTOR::Data_t = "Data"

static

Definition at line 36 of file JDetectorCalibration.hh.

◆ PMTT0s_t

const std::string JDETECTOR::PMTT0s_t = "PMTT0s"

static

Definition at line 38 of file JDetectorCalibration.hh.

◆ DOMPositions_t

const std::string JDETECTOR::DOMPositions_t = "DOMPositions"

static

Definition at line 39 of file JDetectorCalibration.hh.

◆ DOMRotations_t

const std::string JDETECTOR::DOMRotations_t = "DOMRotations"

static

Definition at line 40 of file JDetectorCalibration.hh.

◆ PMTSerial_t

const std::string JDETECTOR::PMTSerial_t = "PMTSerial"

static

Definition at line 42 of file JDetectorCalibration.hh.

◆ DOMSerial_t

const std::string JDETECTOR::DOMSerial_t = "DOMSerial"

static

Definition at line 43 of file JDetectorCalibration.hh.

◆ DOMId_t

const std::string JDETECTOR::DOMId_t = "DOMId"

static

Definition at line 44 of file JDetectorCalibration.hh.

◆ T0_t

const std::string JDETECTOR::T0_t = "T0"

static

Definition at line 45 of file JDetectorCalibration.hh.

◆ PX_t

const std::string JDETECTOR::PX_t = "PX"

static

Definition at line 46 of file JDetectorCalibration.hh.

◆ PY_t

const std::string JDETECTOR::PY_t = "PY"

static

Definition at line 47 of file JDetectorCalibration.hh.

◆ PZ_t

const std::string JDETECTOR::PZ_t = "PZ"

static

Definition at line 48 of file JDetectorCalibration.hh.

◆ Q0_t

const std::string JDETECTOR::Q0_t = "Q0"

static

Definition at line 49 of file JDetectorCalibration.hh.

◆ QX_t

const std::string JDETECTOR::QX_t = "QX"

static

Definition at line 50 of file JDetectorCalibration.hh.

◆ QY_t

const std::string JDETECTOR::QY_t = "QY"

static

Definition at line 51 of file JDetectorCalibration.hh.

◆ QZ_t

const std::string JDETECTOR::QZ_t = "QZ"

static

Definition at line 52 of file JDetectorCalibration.hh.

◆ OK_t

const std::string JDETECTOR::OK_t = "OK"

static

Definition at line 54 of file JDetectorCalibration.hh.

◆ GENDET_DETECTOR_FILE_FORMAT

const char* const JDETECTOR::GENDET_DETECTOR_FILE_FORMAT = ".det"

static

File name extensions.

file format used by gendet

Definition at line 62 of file JDetectorToolkit.hh.

◆ BINARY_DETECTOR_FILE_FORMAT

const char* const JDETECTOR::BINARY_DETECTOR_FILE_FORMAT = ".dat"

static

JIO binary file format.

Definition at line 63 of file JDetectorToolkit.hh.

◆ KM3NET_DETECTOR_FILE_FORMAT

const char* const JDETECTOR::KM3NET_DETECTOR_FILE_FORMAT = ".detx"

static

KM3NeT standard ASCII format.

Definition at line 64 of file JDetectorToolkit.hh.

◆ ZIPPED_DETECTOR_FILE_FORMAT

const char* const JDETECTOR::ZIPPED_DETECTOR_FILE_FORMAT = ".gz"

static

zipped KM3NeT standard ASCII format

Definition at line 65 of file JDetectorToolkit.hh.

◆ GDML_DETECTOR_FILE_FORMAT

const char* const JDETECTOR::GDML_DETECTOR_FILE_FORMAT = ".xml"

static

KM3Sim input format.

Definition at line 66 of file JDetectorToolkit.hh.

◆ GDML_SCHEMA

const char* const JDETECTOR::GDML_SCHEMA = getenv("GDML_SCHEMA_DIR")

static

directory necessary for correct GDML header output

Definition at line 67 of file JDetectorToolkit.hh.

◆ getRotation

JRotation JDETECTOR::getRotation

static

Function object to get rotation matrix to go from first to second module.

Definition at line 823 of file JDetectorToolkit.hh.

◆ getDetectorVersion

const JGetDetectorVersion JDETECTOR::getDetectorVersion

static

Function object to map detector variant to detector version.

Definition at line 166 of file JDetectorVersion.hh.

◆ putDetectorVersion

const JPutDetectorVersion JDETECTOR::putDetectorVersion(getDetectorVersion)

static

Function object to map detector version to detector variant.

◆ LED_BEACON_PMT_TYPE

const int JDETECTOR::LED_BEACON_PMT_TYPE = 2

static

PMT type of LED beacon.

Definition at line 37 of file JMonteCarloDetector.hh.

◆ getPMTStatusBit

const JGetPMTStatusBit JDETECTOR::getPMTStatusBit

static

Function object to map key to PMT status bit.

Definition at line 347 of file JPMT.hh.

◆ putPMTStatusBit

const JPutPMTStatusBit JDETECTOR::putPMTStatusBit(getPMTStatusBit)

static

Function object to map PMT status bit to key.

◆ getTransitionTime

const JTransitionTimeGenerator JDETECTOR::getTransitionTime

static

Function object to generate transition time.

Definition at line 1071 of file JPMTTransitTimeGenerator.hh.

◆ getTransitionTimeProbability

const JTransitionTimeProbability JDETECTOR::getTransitionTimeProbability

static

Function object of transition time prabability.

Definition at line 1046 of file JPMTTransitTimeProbability.hh.

◆ getTransitionTimeProbability2D

const JTransitionTimeProbability2D JDETECTOR::getTransitionTimeProbability2D

static

Function object of twofold transition time prabability.

Definition at line 1096 of file JPMTTransitTimeProbability.hh.

Classes

Typedefs

Functions

Variables

Detailed Description

Typedef Documentation

◆ JPMTOutput

◆ JCLBInput

◆ JDetectorTypes_t

◆ JPMTCalibration

◆ JModulePosition

◆ JModuleRotation

◆ JRateL0_t

◆ JRateL1_t

◆ multiplicity_type

◆ JModuleComparator

◆ JModuleIdentifier

◆ JPMTParametersMap_t

Function Documentation

◆ operator<() [1/5]

◆ getTime()

◆ putTime()

◆ getToT()

◆ putToT()

◆ reset()

◆ hasDetector() [1/3]

◆ hasDetector() [2/3]

◆ hasDetector() [3/3]

◆ getDetectorAddressMap() [1/2]

◆ getModuleAddressMap()

◆ getPMTAddressTranslator()

◆ getPMTLogicalIndex()

◆ getDetectorAddressMap() [2/2]

◆ hasDetectorAddressMap()

◆ is_valid()

◆ to_json() [1/3]

◆ from_json() [1/3]

◆ to_json() [2/3]

◆ from_json() [2/3]

◆ to_json() [3/3]

◆ from_json() [3/3]

◆ getARCADetectorHeader()

◆ getORCADetectorHeader()

◆ getMaximalDistance()

◆ GetXrotationG4()

◆ GetYrotationG4()

◆ read_gdml()

◆ write_gdml()

◆ getMaximalTime() [1/2]

◆ getMaximalTime() [2/2]

◆ getTimeRange() [1/2]

◆ getNumberOfPMTs() [1/2]

◆ getNumberOfPMTs() [2/2]

◆ getNumberOfStrings()

◆ getStringIDs()

◆ getNumberOfFloors()

◆ getNumberOfModules()

◆ load()

◆ store()

◆ getModule() [1/2]

◆ getModule() [2/2]

◆ getModuleLabel()

◆ getPosition()

◆ getCalibration()

◆ getDetectorVersions() [1/3]

◆ getDetectorVersions() [2/3]

◆ getDetectorVersions() [3/3]

◆ setAttributes()

◆ setAttributes< JNullType >()

◆ getPMTStatusBits() [1/3]

◆ getPMTStatusBits() [2/3]

◆ getPMTStatusBits() [3/3]

◆ operator<() [2/5]

◆ operator==()

◆ getSurvivalProbability()

◆ getHitProbability()

◆ getMaximalHitProbability()

◆ getQE()

◆ operator<() [3/5]

◆ operator<() [4/5]